Selvol™ Premiol DWC-50

High performance, “all temperature” technology

Selvol™ Premiol DWC50 is a fluid loss control additive that was designed specifically for high-temperature applications.

Selvol™ Premiol DWC50 is a nonretarding powder that provides fluid-loss control and gas migration control properties for cement slurries at temperatures ranging up to 300 F.

Typical Selvol™ Premiol concentrations range from 0.5% to 1.5% by weight of cement (%bwoc). Concentration will depend on bottom hole temperature and desired slurry density. Selvol™ Premiol DWC50 can be used in slurries with a wide range of densities (15.6 ppg up to 17.1 ppg).

Features

  • Brown powder
  • Easy to handle
  • Dissolves easily under ambient conditions
  • Compatible with broad range of additives
  • Mixable at high densities
  • Adjustable rheology
  • Functions at high temperature (150ºC)
  • Functions at low temperature (50-60ºC)・z
  • Meets industry standards for FLC agents:
    • API fluid loss (1000 psi) of < 100 mL/30-min
    • PV < 200 cp, YP > 0 lb/100-sq.ft. YP > 0 lb/100-sq.ft.
    • Free fluid < 2%

Benefits

Selvol™ Premiol DWC additive works well to 300 F (150 C)

  • Powder form
  • Meets industry standards for fluid loss control agents
    • API fluid loss (1000 psi) of < 100 mL/30-min
    • PV < 200 cp, YP > 0 lb/100-sq.ft.
    • Free fluid < 2%
  • Gas migration control
  • Nonretarding
  • Compatible with multiple additives
  • Mixable at high densities
  • Adjustable rheology
  • Easy to design
  • Environmentally friendly
  • Dissolves easily under ambient conditions
  • Easy to handle
  • Could be used across a large temperature range
  • Lower in cost than other high temperature additives

Studies

View slurry designs, Condition A and B Results

  • DWC FLC Slurry Designs
  • DWC Condition A Results
    • Rheology
    • Fluid loss
    • Free fluid
    • Thickening time
    • Compressive strength
  • DWC Condition B Results
    • Thickening time
    • Compressive strength

Contact us for more information.on Selvol™ Premiol DWC-50

Application

  • Deep well cementing
  • Annular gas migration
Typical Performance for different slurries with Selvol™ Premiol DWC 50
Temperature 100 150 200 250 250 250 263 300 300
Density (ppg) 17.0 17.0 17.0 16.5 16.5 16.8 16.4 16.4 16.5
Selvol™ Premiol DWC 50 (%bwoc) 0.56 0.56 0.56 0.56 1.0 0.56 1.0 1.5 0.71
API Fluid Loss (ml/30min) 12 20 20 92 44 52 52 70 82
Thickening Time
(to reach 70 Bc)
– – – – 5h12m – – 4h56m –
Free Water (%) at a90F 1.2 2.4 0.8 0.8 2.4 2.4 – 0.0 0.0
Compressive Strength12hr (psi) – – – – 1726 – 1905 1148 –
Compressive Strength24hr (psi) – – – – 1823 – 2625 2113 –
RECOMMENDED SLURRY DESIGN
WELL CONDITION SLURRY
7″ Liner Texas Lehigh Class H Cement 0.25 gal/sk Kelig-32
17,000 depth 35% bwoc 100-mesh silica flour 4.94 gal/sk fresh water
BHST=337 F(169F) 1.13% bwoc Selvol™ Premiol Density = 16.5 lb/gal
BHST=300 F(149F) \up0\nosupersubDWC 50 Yield = 1.39 cu-ft/sk
BH Pressure=12,350 0.03 gal/sk FP-6L
Rheology
Temperature 300
rpm
200
rpm
100
rpm
60
rpm
30
rpm
6
rpm
3
rpm
PV YP
80 °F 510 364 204 134 76 20 14 459cP 264 lb/100ft2
190 °F 280 194 104 64 34 8 6 51cP 16 lb/100ft2
Free Water
Temperature Measured Fluid Free Water (%)
190 °F 0 mL 0.0
Fluid Loss
Temperature Collected Fluid Time Fluid Loss
300 °F 26 mL 30 min 52cc/30-min
Compressive Strength
Condition Time
50 psi 7:44 (hrs:min)
500 psi 9:03 (hrs:min)
2380 psi 12:00 (hrs:min)
3548 psi 24:00 (hrs:min)
Thickening Time
Condition Time Pressure Temperature
Initial 0 min 760 psi 80 °F
Fimal 37 min 6000 psi 120 °F

Time to 70 BC 4:20 (hr:min)

Products

Selvol Polyvinyl Alcohol
Selvol Ultalux
Selvol Ultiloc
Selvol Premiol
S-LEC B/K Polyvinyl Acetal Resins
Advancell Thermo-Expandable Microspheres